An easily transportable weighbridge.
DIY-P Pit-less transportable weighbridge
Specifications
| Overall height | 420 mm |
| Type | pit less |
| Driving surface | durbar |
| Dimensions | from 6 to 36m |
| Capacities | 60-80t |
| Structure | Bended plate construction For easy transportation has been designed in 2 parts: • Main body consists of 3 pieces, each having dimensions: Length: 6m, Width: 2,3m • Side platforms (yellow coloured parts), preventing trucks from driving out, are bolted on site. Width: 0,35m x2 = 0,7m Total platform’s width: 2,3m + 0,7m = 3m Removable cover plates above each loadcell |
| Type of loadcells | Flintec RC 3 30t (optionally other brand loadcells on request) |
| Loadcells buffering system | Adequate lateral and longitudinal bumper arrangement without the use of mechanical constrainer, check/tie rods, yolk |
| Type of crane for installation | Any 3t crane |
| Transportation | By normal TIR truck or sea container |
| Below options available on request | - Side rails option - Weighing terminal - Prefabricated Steel Foundation Options: • Steel foundation SF 140 for any compacted ground • SF140 will be factory pre-mounted under the foundation plates in order to be easily installed and transported - Steel Ramps Option - Steel-Concrete ramps option Steel cover, concrete to be poured on site |
